Assuming hybrid is required, the following 176 results were found.
-
Dear all, Is there any possibility to simulate hydrid systems in SAM? Let's say CSP Power Tower molten salt coupled with PV installations? How could I manage? Thanks in advance. Sincerely, manuelDear all, Is there any possibility to simulate hydrid...
- Type: Forum Post
-
Then, can you pls guide how I can convert my XLS or CSV file to SRW format??Then, can you pls guide how I can convert my XLS or CSV file to SRW format??
- Type: Forum Post
-
Please see the format description of the SRW file format for wind resource data in SAM's Help system. You can find it in the table of contents under "Weather Data, Weather File Formats." Best regards, Paul.Please see the format description of the SRW...
- Type: Forum Post
-
model and Generic Battery model. See the SAM YouTube channel for a . Please see sam.nlr.gov/forum/forum-general/2973-hybrid-csp-pv-error-in-running-combine-cases-macros.html. Best regards, Paul.UPDATE: As of SAM 2021.12.02, the Combine Cases macro is...
- Type: Forum Post
-
here is the sam file. Best regards, Luisahere is the sam file. Best regards, Luisa
- Type: Forum Post
-
Hi Luisa, Thank you for sending the file. In SAM 2020.2.29, the Detailed PV model runs a simulation over the analysis period to better model module degradation. It turns out that the Combine Cases macro was written to work only for simulations over a...
- Type: Forum Post
-
Hi Jabbour, When you use the Combine Cases macro, SAM simply adds the output of two separate systems together and uses that "combined" output as the generation profile for the financial cash flow model. It is not possible to model a CSP system that...
- Type: Forum Post
-
Dear Paul, I am Pawan, and we are also facing the same problem while using Macro,kindly help us to resolve this issue. Thanks PawanDear Paul, I am Pawan, and we are also facing the same problem while using Macro,kindly help us to resolve this issue....
- Type: Forum Post
-
Hi Pawan, The macro should be working as of SAM 2020.2.29 Revision 2. The macro is still designed to add up the hourly generation of each system to calculate the system's generation profile over the year, so it cannot dispatch one system based on the...
- Type: Forum Post
-
In several of my projects, I need to use different sized Inverters,some of which are not in the Inverter CEC Database. Since the PV modules are also in different orientations, I created separate cases for each of these combinations. All these cases are...
- Type: Forum Post
-
Hi Mona, Before running the Combine Cases macro, run a simulation for each case separately to make sure there are not any problems with their configuration that are causing simulation errors. If that does not help you identify the cause of the error,...
- Type: Forum Post
-
Hi can you help me to used SAM to make a simulation of two power plants a PV plant and another CSP plant thank you for the help. best regardsHi can you help me to used SAM to make a simulation of two power plants a PV plant and another CSP plant thank...
- Type: Forum Post
-
Hi Hamid, Please see sam.nlr.gov/forum/forum-general/3001. Best regards, Paul.Hi Hamid, Please see sam.nlr.gov/forum/forum-general/3001. Best regards, Paul.
- Type: Forum Post
-
Thank you so much, Paul. It's will be a great pleasure if you can tell where I can find the examples in SAM of approximation the off-grid PV systems either with battery or diesel? Thank you so much, Paul. It's will be a great pleasure if you can tell...
- Type: Forum Post
-
Dear Abdulrahman, You can find some discussion and examples by searching this forum (use the Search box at the top right of this window) for "diesel." Some examples: sam.nlr.gov/forum/forum-general/3191 sam.nlr.gov/forum/forum-general/3051...
- Type: Forum Post
-
Hi Denise, The Combine Systems macro creates a new hourly generation profile for the "combined system" by adding the hourly data for the systems that you combine. If you combine a parabolic trough system with a biopower system, the macro creates a...
- Type: Forum Post
-
Hello, How can I simulate a project that combines wind and PV on same area? The wind should extend the renewable energy provision time. So, I'd like to simulate an area that has good wind after sunset with PV and wind. Thank you.Hello, How can I...
- Type: Forum Post
-
all, Does SAM still have the option to hybridize systems? Thanks in advance. Pablo.Dear all, Does SAM still have the option to hybridize systems? Thanks in advance. Pablo.
- Type: Forum Post
-
Hi Pablo, In SAM 2020.12.02, we removed the "Combine Cases" macro and replaced it with the Generate production profiles and nameplate capacity from open cases option for the Generic System on the Power Plant page. See the Help topic for the Power Plant...
- Type: Forum Post
-
This short video on the SAM YouTube channel demonstrates how to use the feature: Best regards, Paul.This short video on the SAM YouTube channel demonstrates how to use the feature: Best regards, Paul.
- Type: Forum Post